Radiance
A flat band with two 1mm stripes of gold spaced 1mm apart.
|
Gold Abyss
The abyss ring with 1mm wide gold inlaid into the grooves.
|
Arcadia
A flat band with a 3mm stripe of gold. |
Solstice
A 1.75mm stripe of gold with 15 degree angled sides. |
Solstice Wide
A 3mm stripe of gold with 15 degree angled sides. |
Indelible
Flat with two 1.5mm wide round grooves equally spaced.
|
Andromeda
A lightly domed ring with a 1mm stripe of gold. |
Celestial
10 degree angles produce a ridge in the center. |
Primus
A flat design with square edges. |
Amaranth
A flat design only 1mm thick for a low profile and extra
comfort. |
Incessant
A flat design with rounded corners. |
Azure
Two steps on the sides leave a raised band in the middle.
|
Omnipresent
10 Degrees on one side 20 degrees on the other produce an
off-center ridge. |
Perrennial
A flat ring with 45 degree angles on the corners. |
Sacrosanct
This ring is divided into thirds with slight angles on
the sides giving it a faceted look. |
Abyss
A copy of the ring that appeared in the movie The Abyss.
|
Ethereal
A flat ring with round cut-out corners. |
Soma
A thin groove runs down the center of this ring. Can be
made with a half brushed and half polished finish as shown
or all brushed or all polished. |
Perpetual
A 1.5 mm wide round groove on a flat ring. |
Flying Saucer
This ring has 15 degree angled edges with a round center
groove. |
Futuristic
Two thin grooves in the center with beveled edges. |
Transcendental
Three evenly spaced grooves on a flat ring. |
Halo
A copy of the Halo titanium rings that appeared in the
movie Charlie's Angels Full Throttle. |
Metro Mod
A wide center and 25 degree angled edges are separated by
2 thin grooves. |
Equinox
A lightly domed ring. Has a very nice mirror like
reflection. |
Infinity
A domed half round style ring. |
Saturn
Slight angles on the edges and dual grooves in the
center. |
Nubium
A 2mm wide silver inlay in a flat band. |
Divinity
This ring has a blue anodized groove. |
Metropolitan
Angled sides and 2 very thin grooves divide this ring
into thirds. This is a very stylish modern day ring. |
Sabine
A 1mm wide silver inlay in a flat band. |
Maginus
Two 2mm wide silver inlays spaced 1mm apart in a flat
ring. |
Zeno
A 3mm wide silver inlay in a flat band. |
Imbrium
Two 1mm wide silver inlays spaced 1mm apart in a flat
band. |
Silver Abyss
Abyss ring with 1mm silver inlays. |
Archimedes
Two 1mm wide silver inlays spaced 1mm apart in a lightly
domed ring. |
Tycho
Three 1mm wide silver inlays spaced 1mm apart in a flat
ring. |
Crisium
A 1mm wide silver inlay in a lightly domed ring. |
Luna
A 2mm wide silver inlay in a lightly domed ring. |
Luxor
A lightly domed ring with two 1mm stripes of gold spaced
1mm apart. |
Aztec
A flat band with a 2mm stripe of gold. |
Montezuma
A flat band with three 1mm stripes of gold spaced 1mm
apart. |
Aurum
A lightly domed ring with a 2mm stripe of gold. |
Square Wave
A flat ring with a square wave pattern milled into it.
|
Knox
A flat band with two 2mm stripes of gold spaced 1mm
apart. |
Midas
A flat band with a 1mm stripe of gold. |
Vortex
A flat ring with angled lines milled into it. |
Romulus
A flat ring with a simple pattern milled into it. |
Diamondback
A flat ring with a diamondback pattern milled into it.
|
Lightning
A flat ring with a lightning pattern milled into it.
|
Greek Key
A flat ring with a Greek key
pattern milled into it. |
Centurion
A flat ring with a 10 sided
groove. |
Decagon
A 10 sided ring.
|
Quadratic
A round ring that's been
squared to produce a unique shape. |
Salient
A rounded square ring. |
Set 1
These titanium earrings are approximately 5mm in diameter
and can be made longer or shorter for no extra charge. |
Set 2
These titanium earrings are approximately 5mm in diameter
and can be made longer or shorter for no extra charge.
Earrings have 2 thin square shaped grooves on the bottom.
|
Set 3
These titanium earrings are approximately 5mm in diameter
and can be made longer or shorter for no extra charge.
Earrings have 3 equally spaced accent grooves. |
Set 4
These titanium earrings are approximately 5mm in diameter
and can be made longer or shorter for no extra charge.
Earrings have 3 equally spaced round grooves. |
Set 5
These titanium earrings are approximately 5mm in diameter
and can be made longer or shorter for no extra charge.
Earrings have 3 equally spaced V shaped grooves. |
Set 6
These titanium earrings are just 1/8 inch in diameter and
can be made longer or shorter for no extra charge. The
earwires are titanium also. |
|
|
|
